EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
AISI 2507 jauhe 3D-tulostukseen
Metal 3D printing, also known as metal additive manufacturing, is an advanced fabrication technique that involves layer-by-layer deposition of metal powder or metal wire material, which is then melted using a heat source such as a laser beam or an electron beam. This process allows for the rapid creation of metal parts. Compared to traditional manufacturing methods, metal 3D printing offers advantages in terms of efficiency, versatility, and precision, leading to its widespread application in industries such as aerospace, automotive manufacturing, and medical devices.
AISI 2507, also known as duplex stainless steel, is a material known for its excellent corrosion resistance, high strength, and good weldability.
Tuotetiedot
Metal 3D printing, also known as metal additive manufacturing, is an advanced fabrication technique that involves layer-by-layer deposition of metal powder or metal wire material, which is then melted using a heat source such as a laser beam or an electron beam. This process allows for the rapid creation of metal parts. Compared to traditional manufacturing methods, metal 3D printing offers advantages in terms of efficiency, versatility, and precision, leading to its widespread application in industries such as aerospace, automotive manufacturing, and medical devices.
AISI 2507, also known as duplex stainless steel, is a material known for its excellent corrosion resistance, high strength, and good weldability.
Yleistä tietoa
| Lähtöpaikkakunta: | Changsha, Kiina |
| Merkki: | HLPOWDER |
| Tuotenumero: | AISI 2507 |
| Hiukkaskoko: | 15–53 μm / 15–45 μm |
| Certification: | ISO9001, ISO14001 |
| Minimitilausmäärä: | 20kg |
| Pakkaus tiedot: | Rautatynnyri |
| Toimitusaika: | 7-10 päivää |
Sovellukset
● Chemical and Petrochemical Industry
● Offshore- ja meritekniikka
● Öljy- ja kaasuteollisuus
● Lääketieteelliset laitteet
● Ilmailuteollisuus
● Energia-ala
● Rakennus- ja rakennesuunnittelu
tekniset tiedot
Kemiallinen koostumus:
| Metalliseos | Cr | Ni | Mo | Cu | Si | Mn | N | C | Fe |
|
AISI 2507 |
24.00-26.00 | 6.00-8.00 | 3.50-4.50 | ≤ 0.50 | ≤ 1.00 | ≤ 2.00 | 0.24-0.35 | ≤ 0.03 | Bal |
Hiukkaskoko:
| Hiukkaskoko | Napautusherkkyys | Juoksevuus | Hiukkaskokojakauma | ||
| D10 | D50 | D90 | |||
| 15-45μm | ≥ 4.5 | ≤ 20 | 15-22 | 26-35 | 46-55 |
| 15-53μm | ≥ 4.5 | ≤ 20 | 16-26 | 30-38 | 52-58 |
Jauheen ominaisuudet
● High Sphericity& High flowability.
● Low oxygen content.
● The Oxygen content is under 600PPM.
● Narrow Particle Size Distribution.
Paketti
3D-tulostukseen: Jokainen PE-pakkaus + 20 kg:n tölkit tai 25 kg:n/50 kg:n rautatynnyri tai 250 kg:n rautatynnyri.
