EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
Inconel625-nikkelipohjainen jauhe 3D-tulostukseen
Inconel 625 is a nickel-based super alloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.
Tuotetiedot
Inconel 625 is a nickel-based super alloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.
Yleistä tietoa
| Lähtöpaikkakunta: | Changsha, Kiina |
| Merkki: | HLPOWDER |
| Tuotenumero: | Inconel625 |
| Hiukkaskoko: | 15-53μm |
| Certification: | ISO9001, ISO14001 |
| Minimitilausmäärä: | 20kg |
| Pakkaus tiedot: | Rautatynnyri |
| Toimitusaika: | 7-10 päivää |
Sovellukset
● petrokemian
● Marine Engineering
● Automotive
● Aerospace
● Lääketieteellisten laitteiden valmistus
tekniset tiedot
GH3625(Inconel625):
| erä | C | Si | Mn | Ni | Cr | Co | Mo | Al | Ti | Cu | Nb | P | S |
| GH3625 | ≤ 0.1 | ≤ 0.5 | ≤ 0.5 | Bal | 20.0-23.0 | ≤ 1.0 | 8.0-10.0 | ≤ 0.4 | ≤ 0.4 | ≤ 0.07 | 3.15-4.15 | ≤ 0.015 | ≤ 0.015 |
Hiukkaskoko:
| Hiukkaskoko | Napautusherkkyys | Juoksevuus | Hiukkaskokojakauma | ||
| D10 | D50 | D90 | |||
| 15-53μm | ≥ 4.5 | ≤ 20 | 16-26 | 30-38 | 52-58 |
Osan ominaisuudet:
| Osien tiheys (g/cm³) | ≥ 8.4 |
| Painettu (xy) | |
| Vetolujuus (MPa) | ≥ 930 |
| Tuotto vahvuus (MPa) | ≥ 660 |
| Venymä A10 (%) | ≥ 25 |
| Kovuus HV/HRC | ≥260 HV5/15 |
Jauheen ominaisuudet
● Korkea pallomaisuus ja korkea juoksevuus
● Alhainen happipitoisuus
Paketti
3D-tulostukseen: Jokainen PE-pakkaus + 20 kg:n tölkit tai 25 kg:n/50 kg:n rautatynnyri tai 250 kg:n rautatynnyri.
