EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
17-4PH ruostumattomasta teräksestä valmistettu jauhe 3D-tulostukseen
17-4PH is a versatile, precipitation-hardening stainless steel alloy known for its remarkable combination of strength, general corrosion resistance, and mechanical properties at high temperatures up to 315 °C. Engineered for additive manufacturing and powder metallurgy, 17-4PH powder offers ease of use and consistent performance across a wide range of industrial applications, including aerospace, medical devices, and consumer goods.
Tuotetiedot
17-4PH is a versatile, precipitation-hardening stainless steel alloy known for its remarkable combination of strength, general corrosion resistance, and mechanical properties at high temperatures up to 315 °C. Engineered for additive manufacturing and powder metallurgy, 17-4PH powder offers ease of use and consistent performance across a wide range of industrial applications, including aerospace, medical devices, and consumer goods.
Yleistä tietoa
| Lähtöpaikkakunta: | Changsha, Kiina |
| Merkki: | HLPOWDER |
| Tuotenumero: | 17 - 4PH |
| Hiukkaskoko: | 15–53 μm / 15–45 μm |
| Certification: | ISO9001, ISO14001 |
| Minimitilausmäärä: | 20kg |
| Pakkaus tiedot: | Rautatynnyri |
| Toimitusaika: | 7-10 päivää |
Sovellukset
● Ilmailu
● Automotive Industry
● Medical Implants and Devices
● Industrial Tools and Molds
● Precision Engineering
● Mechanical and Engineering
● Customization
tekniset tiedot
Kemiallinen koostumus:
| Metalliseos | Cr | Ni | Cu | Si | Mn | Nb | C | Fe |
| 17 - 4PH | 15.5-17.5 | 3.00-5.00 | 3.00-5.00 | ≤ 1.00 | ≤ 1.00 | 0.15-0.45 | ≤ 0.07 | Bal |
Huomautus: Muita 3D-tulostusjauheita on saatavilla räätälöintivaatimusten mukaisesti.
Hiukkaskoko:
| Hiukkaskoko | Napautusherkkyys | Juoksevuus | Hiukkaskokojakauma | ||
| D10 | D50 | D90 | |||
| 15-45μm | ≥ 4.5 | ≤ 20 | 15-22 | 26-35 | 46-55 |
| 15-53μm | ≥ 4.5 | ≤ 20 | 16-26 | 30-38 | 52-58 |
Note: Other 3D printing powders are available upon any customize requirements
Osan ominaisuudet:
| Osien tiheys (g/cm³) | ≥ 7.9 | |
| Painettu (xy) | Heat-treated(xy ) | |
| Vetolujuus (MPa) | ≥ 980 | ≥ 1200 |
| Tuotto vahvuus (MPa) | ≥ 500 | ≥ 950 |
| Venymä A10 (%) | ≥ 38 | ≥ 10 |
| Kovuus HV/HRC | ≥245 HV | ≥32 HRC |
Jauheen ominaisuudet
● Korkea pallomaisuus ja korkea juoksevuus
● Low oxygen content
● Kaasun atomisointi typellä
Paketti
3D-tulostukseen: Jokainen PE-pakkaus + 20 kg:n tölkit tai 25 kg:n/50 kg:n rautatynnyri tai 250 kg:n rautatynnyri.
